The American Autowire 1983-87 Chevy Truck Classic Update Complete Wiring Kit gives you everything you need to re-wire the car, but with modern features and upgrades. This kit is the perfect "resto-mod" kit. If you are adding modern features to your classic car, this is definitely the way you want to go. This kit is perfect if you are adding electronic fuel injection, Dakota Digital gauges, Vintage Air, or any of the other modern essentials to your classic Chevy Truck. The harness is completely laid our for you for the easiest installation possible. The harness is properly protected and sheathed, and the lengths for each branch are cut so that they give you enough room to get there and make your connections, but not too much to where you have a ton of excess. Please see below for a full list features included with this 1983-1987 Chevy Truck wiring kit.
- A replacement headlight switch with internal 25-amp circuit breaker, adjustable length shaft, and custom knob.
- Standard turn signal flasher, hazard flasher, and horn relay mounted on harness.
- Fuse box designed to fit in original location with no mods to the firewall. All required hardware supplied. New ATO fuse panel allows for easy fuse and circuit breaker accessibility. Harness is laid out and formed to allow for nearly all after market accessories such as; gauge packages, wiper systems, heat and air conditioning systems, etc.
- Steering column connectors can plug directly into most aftermarket steering columns or stock 1975 and up GM columns. Can also be mated to earlier columns using the adapter and terminals included in the kit.
- Separate under dash courtesy lamp assemblies are also included for use along with your original dome/interior lighting feeds.
- Instrument Cluster wiring is designed with a "cluster harness disconnect" system for easy service and assembly. Original terminals and connector that will plug into the original gauge cluster (another American Autowire exclusive) are provided. The system will also connect into most popular aftermarket gauges such as DAKOTA DIGITAL, CLASSIC INSTRUMENTS, AUTOMETER, VDO, and others.
- Rear body harness assembly plugs into the main harness at the main bulkhead disconnect location and our longer leads allow for stock or custom routing of the wires. Rear body wiring includes backup light lead wires and connectors along with stop and tail light lead wires and connectors. License plate lamp lead connection, as well as the fuel tank sender lead connection is also included.
- Original style lamp sockets and side markers for fleet side and original style molded connections for step side rear lamps are included.
- Engine wiring includes feeds for coil, tach, water temperature, oil pressure, electric choke, and electric speedometer (if needed). A heavy gauge alternator feed and fusible link are also included for any typical high output 1 wire or internally regulated alternator. Connectors supplied for power and tach leads for GM style H.E.I. distributors along with various oil and temp senders.
- Front lighting includes extra long leads that can be routed for stock or optional appearances. All head light, parking light, and directional light leads, along with a switched trigger wire for an electric fan relay (usually recommended with AC) are provided. Mating terminals and connectors are also provided for you to complete your custom installation.
- New parking lamp socket and side marker lamp sockets are also included.
- Supports both single and dual headlight models.