The BIM-01-2-AEM diagnostic interface module reads engine information from EM CAN bus (AEMnet) enabled devices, including Infinity ECU, Series 2 EMS or EMS-4 kits. This module is a direct plug in, utilizing a supplied 4 pin harness for easy connection with the AEMnet system.
This module collects and outputs the following available readings to Dakota Instrument Systems, depending on AEM application and add-ons selected:
• Tachometer
• Speedometer
• Water Temperature
• Oil Pressure
• Check Engine Indicator
• A/F Ratio
• Intake Air Temperature
• Boost
• Transmission Temp
• Fuel Pressure
* The BIM-01-2-AEM decodes information provided by Infinity ECU, Series 2 EMS or EMS-4 kits and supplies it to the VFD3, VHX, HDX and RTX control box instrument systems ONLY. Available information depends on AEM application and add-ons in use
Compatible with Dakota Digital RTX, HDX, VHX and VFD3 systems with a black plastic control module. BIM-compatible control boxes utilizing a 3.5mm headphone jack BIM input will require a 3.5mm male connector to 4-pin male connector (394193). Earlier instrument systems utilizing aluminum control modules are not capable of BIM connectivity.