JL Audio RD1500/1 1500 Watt Monoblock Amplifier

The JL Audio RD1500/1 is a perfect amplifier for powering 1 or 2 subwoofers. The RD1500/1 puts out 750 watts of RMS power at 4 ohms, 1500 watts at 2 ohms, and 1500 watts at 1 ohm. In order to make the amplifier 1 ohm stable, you will need to flip a switch on the amplifier from 2 ohm mode to 1 ohm mode. The RD1500/1 is perfect for powering a single high power woofer with some head room or multiple high power woofers. This amp uses JL's NexD switching technology to deliver clean power with incredible efficiency and low distortion.

The RD1500/1 comes in a stylish, black finish with control on the top of the amplifier underneath the protectile cover. This amp has 12dB/octave crossovers and high, low, and all pas filters. You have the option of running both high or low level inputs, and the amp features automatic turn-on capability. The RD1500/1 has a 2-channel pre-amp output that allows you to easily add an additional amplifier if you have a larger system with multiple amps for your subwoofer or if you need an amplifier to power your speakers.

One of the unique features of the JL RD amplifiers is the LED clipping indicator. When you play test tunes, the amplifier will light up to first tell you when you get a clipped signal from your radio or head unit. This tells the volume level which you should never exceed. Once you know where your radio clips, you turn the gain up on the amplifier until you see the LED light up again. You turn the gain back slightly to make the light stop illuminating and you have gains perfectly set. This takes the guesswork out of the equation and ensures maximum power output without disotrtion and clipped signals.

Other Items You May Need:

• 4 AWG Amp Wiring Kit
• RCA Cables
• JL Audio RBC-1 Bass Knob
• Speaker Wire
• JL Audio Subwoofers