The JL Audio CL-RLC is an active, 7V RMS pre-amplifier which can control your subwoofer or act as a volume knob
if you are just running a Bluetooth connection, directly to the amplifier. The line driver improves the sound quality you get
from the amplifier and unlike other, low-cost line level controls, the signal does not pass through the control knob, instead the knob
send volume signals in order to keep your music crystal clear and eliminate unnecessary noise.
When using the CL-RLC with a subwoofer, you can control the bass level of the subwoofer from this knob at your dash. When using the CL-RLC
as a full volume controller, it allows you to control the volume of your stereo system, removing the need for a radio
if you just want to stream music or use an auxiliary input.
- Channel Separation: >80 dB
- Output Impedance: 475 Ω
- Gain Range: 7.5 V RMS
- Max. Unclipped Output: 7.5 V RMS
- Frequency Response: 10 Hz - 30 kHz (+0/-1 dB)
- THD+N @ Rated Output: Less than 0.05% @ 7.5 V RMS
- S/N Ratio: >117 dB @ 7.5 V RMS
- Max. Input Level: 4 V RMS
- Operating Current Draw: 90 mA
- Width (W): 3.94 in / 100 mm
- Height (H): 1.21 in / 31 mm
- Depth (D): 1.63 in / 41 mm
- Net Weight: 0.55 lb / 0.25 kg