The 1964-1966 Oldsmobile Cutlass Kenwood dual dash mount speaker consists of two, Kenwood 3.5" speakers that are mounted on a plate to give you stereo sound from your original mono location. The Kenwood dual dash mount speaker is a great way to add stereo sound to your vehicle. This speaker is designed to fit in applications where the speaker mounts via screws and the speaker itself does not have a bracket attached to it. Each 4 ohm, 3.5" speaker will connect directly to your Custom Autosound or aftermarket radio.
If you have an original, 8 Ohm or 10 Ohm radio, this speaker will not work. You must use this speaker with radios designed for 4 ohm applications.
Standard vs. Kenwood Excelon Speakers
We recommend upgrading to the Kenwood Excelon speakers. The standard Kenwood speakers that are used in this speaker will work, but there is nothing speical about them. However, for a litlte bit extra, the Excelon speakers just sound better. The Excelon line is Kenwood's top-of-the-line offering and these speakers
will work directly off of the radio and will sound even better if you add an amplifier.
Speakers
Standard Kenwood
Tweeter Material
Dual Cone
Surround
Foam
RMS Power Handling (Per Speaker)
10 Watts
Sensitivity
89dB @ 1 W/1m
Features
⬤
Low Cost, Replacement Speaker
⬤
Very Low Power Handling
⬤
Water Resistant Cone
Kenwood Excelon
Tweeter Material
Silk Dome (Soft Dome)
Surround
Rubber
RMS Power Handling (Per Speaker)
50 Watts
Sensitivity
83dB @ 1 W/1m
Features
⬤
Silk dome tweeter for warm, rich, balanced sound
⬤
Kenwood's Top of the Line 3.5" Speakers
⬤
Polypropylene Cone with Withstand UV and Moisture Better than the Standard Paper Cone
⬤
You can't go wrong with Kenwood Excelon!
The Excelon Speakers are worth the Upgrade Cost.
- 1964-1966 Oldsmobile Cutlass