Our Kicker 12" CompR and CX400.1 Loaded Subwoofer Package gives you a perfect setup with a subwoofer, a box, an amplifier that will provide enough power, an amp wiring kit, and 15 feet of speaker wire.
You do not need to worry about wiring to the correct impedance or calculating the correct air space. Everything is matched for you.
This kit is perfect if you want to add a subwoofer to your vehicle with minimal installation work required.
Components
Kicker 12" Comp R
Power Handling
500W RMS
Wired Impedance
2 Ω
Width
18-3/8" (466mm)
Height
16" (406mm)
Depth
11-1/4" (285mm) - Top
14-7/16" (367mm) - Bottom
Kicker 46CXA400.1
Power Rating
150W x 1 @ 4 Ohms
300W x 1 @ 2 Ohms
400W x 1 @ 1 Ohms
Frequency Response
25 Hz- 200 Hz (+0, -1dB)
Features
⬤
Affordable Kicker Power
⬤
Accepts High and Low Level Inputs
⬤
Low Pass Filter 50-200Hz
⬤
12 db/octave Filter Slope
⬤
Optional Bass Knob (CXARC)
⬤
8-1/8" (L) x 6-3/4" (W) x 2-3/8" (H)
Upgrade Options
Kicker 46CXA800.1
Power Rating
300W x 1 @ 4 Ohms
600W x 1 @ 2 Ohms
800W x 1 @ 1 Ohms
Frequency Response
25 Hz- 200 Hz (+0, -1dB)
Features
⬤
Affordable Kicker Power
⬤
Accepts High and Low Level Inputs
⬤
Low Pass Filter 50-200Hz
⬤
12 db/octave Filter Slope
⬤
Optional Bass Knob (CXARC)
⬤
8-1/8" (L) x 6-3/4" (W) x 2-3/8" (H)
Rockford Fosgate R2-500x1
Power Rating
300W x 1 @ 4 Ohms
500W x 1 @ 2 Ohms
N/A x 1 @ 1 Ohm
Frequency Response
50 Hz- 250 Hz
Features
⬤
Affordable Rockford Fosgate Power Power
⬤
Accepts High and Low Level Inputs
⬤
CLEAN Setup, RGB LED Clipping Indicators
⬤
12 db/octave Filter Slope
⬤
15-40 Hz Infrasonic Filter @ 12dB/Octave
⬤
Pass Through Outputs
⬤
Includes RLC Bass Knob
⬤
8.5" (L) x 6.8" (W) x 1.9" (H)
JL Audio JD500/1
Power Rating
250W x 1 @ 4 Ohms
350W x 1 @ 3 Ohms
500W x 1 @ 2 Ohms
Frequency Response
10 Hz- 150 Hz (+0, -1dB)
Features
⬤
LED Clipping Indicators
⬤
Accepts High and Low Level Inputs
⬤
Low Pass Filter
⬤
12 db/octave Filter Slope
⬤
0 to +12 db Bass Boost @ 45 Hz
⬤
Optional Bass Knob (RBC-1) Sold Separately
⬤
7.83" (L) x 7.68" (W) x 2.09" (H)
JL Audio RD500/1
Power Rating
250W x 1 @ 4 Ohms
350W x 1 @ 3 Ohms
500W x 1 @ 2 Ohms
Frequency Response
7 Hz- 500 Hz (+0, -1dB)
Features
⬤
LED Clipping Indicator
⬤
Better Thermals & Actual Power Output vs. JD Series
⬤
Accepts High and Low Level Inputs
⬤
Low Pass Filter
⬤
12 db/octave Filter Slope
⬤
Optional Bass Knob (RBC-1)
⬤
9.78" (L) x 6.96" (W) x 2.12" (H)
The CX400.1 will work, but the upgrade options will sound much better. There's no bad chocies here.