Kicker KS Series 1939-1940 Ford Convertible Kick Panel Amp & Speaker Upgrade Kit

Our 1939-1940 Ford Convertible Kicker KS Series kick panel and speaker upgrade kit offers top of the line sound quality with the silk dome tweeters of the KS speakers and the 4 channel amplifier used to power them.  Adding an amplifier to your classic car stereo system is somewhat like adding a supercharger or turbo to your engine.  The amp increases the power to the speakers and in return your speakers will play louder, clearer and just overall so that much better.  The highs will be higher, the lows lower and there is less distortion.  With this kit you will have 6.5" speakers up front, mounted in the kick panels and dual dash mounted speakers.  We feel that our 1939-1940 Ford Convertible kick panel speaker upgrade kit offers better sound quality than the dash speaker option because you get 6.5" speakers up front instead of 3.5" or 4" speakers.  Also, the location of the kick panel speaker provides better acoustic sound quality than the dash speaker.  If you look at new cars today, they usually have a decent sized speaker in the door panel.  In classic cars, we can't do that due to the door panel designs and overall design of the vehicle (less plastic in classic cars).

For the kick panels in this kit, we use the Custom Autosound ABS kick panels that are slightly modified, and bow out to accommodate a 6.5" speaker.  The kick panels come in a textured black finish to match the texture of most vehicles' stock kick panels and they can be painted to match your interior if you choose.  The speakers come pre-mounted in the kick panel, but if you do need to paint them, they can easily be removed by removing the 4 screws that hold them in.  The Kicker KS series speakers are some of the best coaxial speakers on the market and they come with silk dome tweeters for smooth, rich, warm, and balanced sound.  The KS speakers sound better than the CS series speakers and because the amp that comes in the kit offers plenty of power that is needed to drive them.  Most 6.5" speakers are too deep and require spacer rings or custom fabrication to fit.  The problem with spacer rings is that when you use them, you are pushing the front side of the speaker out to reduce the back side depth and in doing so, it will hit the e-brake pedal of most vehicles.  It is somewhat of a catch-22 situation.  Luckily, we are able to offer these Kicker KS series speakers that have shallow mounting depth, the grille does not protrude too far on the front side, and they sound really good!  

This Kicker KS Series Dual Dash Mount Speaker features two, 3.5 inch Kicker KS Series speakers mounted on a ABS plastic plate that mounts directly to a non-bracketed 4x10 dash speaker application. The Kicker KS Series Dual Dash Mount Speakers performs best when powered with an amplifier. Overall we think that these are the best sounding dash speakers we offer when powered properly. They will sound good when powered directly by the radio but we typically recommend the CS series if you are not using an amplifier as they are more efficient. The Kicker KS Series is the top of the line, standard speaker offering from Kicker. These speaker feature heavier polypropylene cones for good bass response and a rubber surround for durability and UV resistance.

We offer two different amplifier options to power the four speakers.  We offer the Kicker CX series 300 watt 4 channel amp or the Kicker KX series 400 watt 4 channel amp.  The CX puts out 40 watts of constant power at 4 ohms while the KX steps it out to 50 watts.  Although it may only be 10 watts of rated power, the KX will out power its rating by more watts than the CX will and the KX will have cleaner, better sounding power.  Your radio may say that it is putting out 50 watts of power, but that is peak power.  If you go based on peak power, this 300 watt amp would be a 1200 watt amp.  The additional power allows your speaker to play louder, clearer, and cleaner.  The extra power means you can turn your radio up loud enough to drive down the highway, have your windows down, and still hear your radio over the wind and engine/exhaust noise without distortion.  Both the CX and the KX amps can run off either high level or low level inputs so you can run traditional RCA cables (included with amp wiring kit) from the pre-amp outputs of your radio or you can use the speaker wire outputs and plug those into the amp, but they require separate speaker wire to RCA adapters (P/N KISL).  The amp is worth it.  For a couple hundred dollars it will make driving your classic car that much more enjoyable especially considering how much money is likely invested in your vehicle

Our Kicker KS series, 1939-1940 Ford Convertible kick panel speaker upgrade kit is perfect if you are looking for the unbeatable sound quality, but you do not want to add a subwoofer for the bottom end.  This amp and speaker kit takes your speakers to the next level in terms of sound quality to give you a stereo that will sound better than the factory stereos in many "premium" sound systems in today's new cars.