Rockford Fosgate RZR14-STG4 800W 4 Speakers + Subwoofer Kit w/ RGB LEDs For Polaris RZR

The Rockford Fosgate RZR14-STG4 is a 5 speaker, complete stereo kit for your Polaris RZR. This kit includes front speakers, rear cage-mounted speakers, a glove box subwoofer, an 800 watt 4 channel amplifier, a PMX-2 head unit, an RGB LED controller, and the harness to connect everything together. Rockford Fosgate recently updated and upgraded these kits with their new M1 speakers and subwoofer, as well as the amplifier with their IPX6 rated M5 series amps. If you are looking for a full-range system with 4 speakers, a subwoofer, a head unit, and OEM quality fit and finish, the Rockford Fosgate X17-STG4 is the perfect choice. for a melt-your-face-off loud experience.

Speakers

The RZR14-STG4 kit includes the Rockford Fosgate M1-65B speakers. These speakers handle 75 watts RMS and have a 1-inch LCP tweeter. These speakers are bright, crisp, and a perfect match for the amplifier. The M1-65B speakers will play plenty loud for the majority of RZR owners. The M1-65B speakers will withstand anything the environment can throw at them.

Although the tweeter and performance is virtually the same as the RM1652B speakers than came in the previous version, the M1-65B speakers look significantly better. These speakers now include Rockford's Color Optix RGB LEDs. The speakers will now light up and you can control both the color and the mode with the Rockford Fosgate phone app. The RGB LED controller is included with the kit and you connect to it via Bluetooth on your phone. All of the wiring and connections needed for the Color Optix RGB LEDs are integrated into the main harness. Both the speaker connections and the LED connections are plug-and-play.

Amplifier

The RZR14-STG4 includes the Rockford Fosgate M5-800X4, 800 watt 4-channel amplifier. This amplifier delivers 100 watts to each 6.5" speaker and up to 400 watts to the subwoofer. When following the installation instructions, the four speakers are wired in parallel to a 2 ohm load to the front channels. The rear channels are bridged to power the subwoofer at 4 ohms. This amp is similar to the previous generation, but it is now IPX6 rated, it has higher power ratings, and it comes with UTV specific, Preset tone switches. The IPX6 rating means that the amp can be sprayed down and get wet, you just can't submerge it. The connections on the ends of the amplifier are sealed and overmolded and there is a waterproof cover for the tone controls.

In addition to the increased power, the game changer with the M5-800X4 amplifier are the UTV kit-specific preset switches. When turned to the "On" position, the amplifier bypass the tone controls on the amplifier and uses the optimal gain and crossover settings that were set by Rockford's engineering and product development team. This takes the guesswork out of the tone controls. You don't have to worry about the gains, or the crossovers, or any of that. Simply set the switches properly and you are good to go. This guarantees that you don't get clipped signals and that you minimize distortion for maximum volume and clarity. In addition to providing the best sound possible, it also ensures that you don't blow your speakers, subwoofer, or amplifier.

Subwoofers & Enclosures

This RZR14-STG4 kit includes comes with a glove box subwoofer enclosure and a 10 inch M1D2-10IB subwoofer. The 10 inch M1 subwoofer can handle 300 watts RMS, 50% more RMS power that the previous subwoofer could handle. The enclosure features a ported design for improved output, but it also comes with a cap, if you take your RZR through water and want to seal it up. The texture on the subwoofer enclosure matches the texture of the RZR's interior and bolts directly to factory mounting points. You do lose the storage from the glovebox with this kit, but most RZRs that are adding a stereo system like this, have added additional storage like door bags, center bags, etc.

The 10 inch M1 subwoofer comes with Color Optix RGB LEDs to light up and match the front speakers and the rear cage mount speakers.

Head Unit & Dash Kit

This kit includes a PMX-2 marine head unit and the Rockford Fosgate RZR dash kit. The two combine to provide an OEM quality appearance in your dash while also providing a user fiendly interface to control your stereo system. The PMX-2 head unit offers virtually everything you could want from a UTV head unit. The PMX-2 comes with an AM/FM/WB tuner, Bluetooth, USB, and AUX. The PMX-2 has a full color, 2.7" TFT display and has an easy-to-use volume knob that is large enough to control while wearing gloves. The front of the unit has push button subwoofer control which allows you to quickly adjust bass levels depending on the song and recording.

Cage Mount Speakers

The M1WL-65MB speakers mount to the cage in the rear. These cage-mounted speaker cans come with the M1-65MB speakers pre-loaded and installed. The speakers have the same grilles as the front speakers, they have the Color Optix RGB LEDs, and the rear of the speaker can lights up as well. On the back of the back of the cage-mounted pod, there is a 360-degree rotatable, LED illuminated Rockford Fosgate logo. The "Diamond R" logo illuminate the same color as teh LEDs on the speaker cone and you can spin it 360 degrees so make sure that the logo is facing the correct direction, regardless where the clamp is in relation to the pod. Whereas before, if the can was mounted sideways at an angle, the Rockford Fosgate logo would be sideways, you can now spin it so that the logo is straight. The cans themselves rotate 360-degrees on the clamp allowing you to aim them in any direction you choose and it allows for maximum flexiblity for both stock and aftermarket cages. The clamps that are included fit round tubing from 1.0" to 2.0" in diameter allowing it to fit both the stock cage and most aftermarket cages. For wiring, the rear pods are plug and play. The RZR14-STG4 includes a rear harness that plugs into the main harness, and each speaker has a weatherproof plug on the back for both the speaker connection and the LEDs.

Harness

The wiring harness for the RZR14-STG4 has been updated to include the connections for the Color Optix RGB LEDs. In addition, the connection for the cage mounted speakers and the under seat subwoofers has changed slightly. Everything is designed to be plug and play and there is no cutting, stripping, splicing, crimping, twisting, soldering, or taping required. The rear harness for the cage mounted speakers plugs into the main harness and the main harness works for both 2-seat and 4-seat vehicles.